தமிழர்விக்கி

Module:Citation/CS1/Date validation: திருத்தங்களுக்கு இடையிலான வேறுபாடு

← முந்திய தொகுப்பு
உள்ளடக்கம் நீக்கப்பட்டது உள்ளடக்கம் சேர்க்கப்பட்டது
sync from sandbox;
imported>Info-farmer
en:Module:Citation/CS1/Date_validation இலிருந்து திருத்தங்கள் இறக்குமதி செய்யப்பட்டன
 
(4 பயனர்களால் செய்யப்பட்ட 10 இடைப்பட்ட திருத்தங்கள் காட்டப்படவில்லை.)
வரிசை 1:
 
--[[--------------------------< F O R W A R D D E C L A R A T I O N S >--------------------------------------
]]
வரி 55 ⟶ 54:
return false; -- accessdate out of range
end
end
 
 
--[[--------------------------< I S _ V A L I D _ E M B A R G O _ D A T E >------------------------------------
 
returns true and date value if that value has proper dmy, mdy, ymd format.
 
returns false and 9999 (embargoed forever) when date value is not proper format; assumes that when |pmc-embargo-date= is
set, the editor intended to embargo a PMC but |pmc-embargo-date= does not hold a single date.
 
]]
 
local function is_valid_embargo_date (v)
if v:match ('^%d%d%d%d%-%d%d%-%d%d$') or -- ymd
v:match ('^%d%d?%s+%a+%s+%d%d%d%d$') or -- dmy
v:match ('^%a+%s+%d%d?%s*,%s*%d%d%d%d$') then -- mdy
return true, v;
end
return false, '9999'; -- if here not good date so return false and set embargo date to long time in future
end
 
வரி 195 ⟶ 175:
Function gets current year from the server and compares it to year from a citation parameter. Years more than one
year in the future are not acceptable.
 
Special case for |pmc-embargo-date=: years more than two years in the future are not acceptable
 
]]
 
local function is_valid_year (year, param)
if not is_set (year_limit) then
year_limit = tonumber(os.date("%Y"))+1; -- global variable so we only have to fetch it once
end
 
year = tonumber (year) or lang_object:parseFormattedNumber (year); -- convert to numbersnumber for the comparison;
if year and (100 > year) then -- years less than 100 not supported
return false;
end
if 'pmc-embargo-date' == param then -- special case for |pmc-embargo-date=
return year and (year <= tonumber(os.date("%Y"))+2) or false; -- years more than two years in the future are not accepted
end
return year and (year <= year_limit) or false;
end
வரி 219 ⟶ 208:
]]
 
local function is_valid_date (year, month, day, param)
local days_in_month = {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
local month_length;
if not is_valid_year (year, param) then -- no farther into the future than next year except |pmc-embargo-date= no more than two years in the future
return false;
end
month = tonumber (month); -- required for YYYY-MM-DD dates
if (2 == month) then -- if February
வரி 253 ⟶ 242:
 
Months in a range are expected to have the same style: Jan–Mar or October–December but not February–Mar or Jul–August.
This function looks in cfg.date_names{} to see if both month names are listed in the long subtable or both are
There is a special test for May because it can be either short or long form.
listed in the short subtable. When both have the same style (both are listed in the same table), returns true; false else
 
Returns true when style for both months is the same
 
]]
 
local function is_valid_month_range_style (month1, month2)
if (cfg.date_names.en.long[month1] and cfg.date_names.en.long[month2]) or -- are both English names listed in the long subtable?
local len1 = month1:len();
(cfg.date_names.en.short[month1] and cfg.date_names.en.short[month2]) or -- are both English names listed in the short subtable?
local len2 = month2:len();
(cfg.date_names['local'].long[month1] and cfg.date_names['local'].long[month2]) or -- are both local names listed in the long subtable?
if len1 == len2 then
(cfg.date_names['local'].short[month1] and cfg.date_names['local'].short[month2]) then -- are both local names listed in the short subtable?
return true; -- both months are short form so return true
return true;
elseif 'May' == month1 or 'May'== month2 then -- ToDo: I18N
return true; -- both months are long form so return true
elseif 3 == len1 or 3 == len2 then
return false; -- months are mixed form so return false
else
return true; -- both months are long form so return true
end
return false; -- names are mixed
end
 
வரி 340 ⟶ 324:
local date; -- one date or first date in a range
local date2 = ''; -- end of range date
input.year = tonumber (input.year) or lang_object:parseFormattedNumber (input.year); -- language-aware tonumber()
-- start temporary Julian / Gregorian calendar uncertainty detection
input.year2 = tonumber (input.year2) or lang_object:parseFormattedNumber (input.year2); -- COinS dates are pseudo-ISO 8601 so convert to Arabic numerals
local year = tonumber(input.year); -- this temporary code to determine the extent of sources dated to the Julian/Gregorian
 
local month = tonumber(input.month); -- interstice 1 October 1582 – 1 January 1926
if ((1582 == input.year) and (10 > tonumber(input.month))) or (1582 > input.year) then -- if a Julian calendar date
local day = tonumber (input.day);
tCOinS_date.rftdate = tostring (input.year); -- &rft.date gets year only
if (0 ~= day) and -- day must have a value for this to be a whole date
return; -- done
(((1582 == year) and (10 <= month) and (12 >= month)) or -- any whole 1582 date from 1 October to 31 December or
((1926 == year) and (1 == month) and (1 == input.day)) or -- 1 January 1926 or
((1582 < year) and (1925 >= year))) then -- any date 1 January 1583 – 31 December 1925
tCOinS_date.inter_cal_cat = true; -- set category flag true
end
-- here for all forms of Gregorian dates
-- end temporary Julian / Gregorian calendar uncertainty detection
if 20 < tonumber (input.month) then -- if season, quarter, or proper-name date
if 1582 date >= tonumber(input.year) or 20 < tonumber(input.month) then; -- Julian calendar or season so &rft.date gets year only
date = input.year;
if 0 ~= input.year2 and input.year ~= input.year2 then -- if a range, only the second year portion when not the same as range start year
date = string.format ('%.4d/%.4d', tonumber(input.year), tonumber(input.year2)) -- assemble the date range
end
 
if 20 < tonumber(input.month) then -- if season or proper-name date
local season = {[24] = 'winter', [21] = 'spring', [22] = 'summer', [23] = 'fall', [33] = '1', [34] = '2', [35] = '3', [36] = '4', [98] = 'Easter', [99] = 'Christmas'}; -- seasons lowercase, no autumn; proper-names use title case
if 0 == input.month2 then -- single season, quarter, or proper-name date
if 40 < tonumber(input.month) then
tCOinS_date.rftchron = season[input.month]; -- proper-name datesdate; used in journal metadata only
elseif 30 < tonumber(input.month) then
tCOinS_date.rftquarter = season[input.month]; -- quartersquarter date; used in journal metadata only
else
tCOinS_date.rftssn = season[input.month]; -- seasonsseason date; used in journal metadata only
end
else -- season rangeranges withare alumped secondinto season&rft.chron; &rft.ssn and &rft.quarter are left specifiedblank
if input.year ~= input.year2 then -- season year – season year range or season year–year
if 0 ~= input.month2 then
tCOinS_date.rftssn = season[input.month]; -- start of range season; keep this?
tCOinS_date.rftchron = string.format ('%s %s – %s %s', season[input.month], input.year, season[input.month2], input.year2); -- used in journal metadata only
if 0~= input.month2 then
tCOinS_date.rftchron = string.format ('%s %s – %s %s', season[input.month], input.year, season[input.month2], input.year2);
end
else -- season–season year range
tCOinS_date.rftssn = season[input.month]; -- start of range season; keep this?
tCOinS_date.rftchron = season[input.month] .. '–' .. season[input.month2]; -- season–season year range
end
else -- season–season year range
tCOinS_date.rftchron = season[input.month] .. '–' .. season[input.month2]; -- season–season year range; used in journal metadata only
end
end
 
tCOinS_date.rftdate = date;
tCOinS_date.rftdate = tostring (date);
return; -- done
end
-- here for gregorian calendar dates
if 0 ~= input.day then
date = string.format ('%s-%.2d-%.2d', input.year, tonumber(input.month), tonumber(input.day)); -- whole date
வரி 406 ⟶ 384:
 
 
--[[--------------------------< P A T T E R N S _ T >--------------------------------------------------------------
 
this is the list of patterns for date formats that this module recognizes. Approximately the first half of these
வரி 418 ⟶ 396:
]]
 
local patternspatterns_t = {
-- year-initial numerical year-month-day
['ymd'] = {'^(%d%d%d%d)%-(%d%d)%-(%d%d)$', 'y', 'm', 'd'},
வரி 453 ⟶ 431:
['y-y'] = {'^(%d%d%d%d?)[%-–]((%d%d%d%d?)%a?)$'}, -- year range: YYY-YYY or YYY-YYYY or YYYY–YYYY; separated by unspaced endash; 100-9999
['y4-y2'] = {'^((%d%d)%d%d)[%-–]((%d%d)%a?)$'}, -- year range: YYYY–YY; separated by unspaced endash
['ymx'] = {'^(%d%d%d%d)%-(%d%d)%-XX$', 'y', 'm'}, -- edtf year-initial numerical year-month-XX
['y'] = {'^((%d%d%d%d?)%a?)$'}, -- year; here accept either YYY or YYYY
}
 
 
--[[--------------------------< I S _ V A L I D _ E M B A R G O _ D A T E >------------------------------------
 
returns true and date value if that value has proper dmy, mdy, ymd format.
 
returns false and 9999 (embargoed forever) when date value is not proper format; assumes that when |pmc-embargo-date= is
set, the editor intended to embargo a PMC but |pmc-embargo-date= does not hold a single date.
 
]]
 
local function is_valid_embargo_date (v)
if v:match (patterns_t['ymd'][1]) or -- ymd
v:match (patterns_t['Mdy'][1]) or -- dmy
v:match (patterns_t['dMy'][1]) then -- mdy
return true, v;
end
return false, '9999'; -- if here not good date so return false and set embargo date to long time in future
end
 
 
வரி 490 ⟶ 486:
local coins_date;
 
if date_string:match (patternspatterns_t['ymd'][1]) then -- year-initial numerical year month day format
year, month, day = date_string:match (patternspatterns_t['ymd'][1]);
if 12 < tonumber(month) or 1 > tonumber(month) or 1582 > tonumber(year) or 0 == tonumber(day) then return false; end -- month or day number not valid or not Gregorian calendar
anchor_year = year;
elseif date_string:mw.ustring.match(date_string, (patternspatterns_t['ymxMdy'][1]) then -- yearmonth-initial numerical year: month edtfday, formatyear
yearmonth, monthday, anchor_year, year = date_string:mw.ustring.match (patternsdate_string, patterns_t['ymxMdy'][1]);
if 12 < tonumber(month) or 1 > tonumber(month) or 1582 > tonumber(year) or not is_valid_year(year) then return false; end -- month number not valid or not Gregorian calendar or future year
anchor_year = year;
 
elseif mw.ustring.match(date_string, patterns['Mdy'][1]) then -- month-initial: month day, year
month, day, anchor_year, year = mw.ustring.match(date_string, patterns['Mdy'][1]);
month = get_month_number (month);
if 0 == month then return false; end -- return false if month text isn't one of the twelve months
elseif mw.ustring.match(date_string, patternspatterns_t['Md-dy'][1]) then -- month-initial day range: month day–day, year; days are separated by endash
month, day, day2, anchor_year, year = mw.ustring.match(date_string, patternspatterns_t['Md-dy'][1]);
if tonumber(day) >= tonumber(day2) then return false; end -- date range order is left to right: earlier to later; dates may not be the same;
month = get_month_number (month);
வரி 513 ⟶ 504:
year2 = year;
 
elseif mw.ustring.match(date_string, patternspatterns_t['dMy'][1]) then -- day-initial: day month year
day, month, anchor_year, year = mw.ustring.match(date_string, patternspatterns_t['dMy'][1]);
month = get_month_number (month);
if 0 == month then return false; end -- return false if month text isn't one of the twelve months
 
--[[ NOT supported at en.wiki
elseif mw.ustring.match(date_string, patternspatterns_t['yMd'][1]) then -- year-initial: year month day; day: 1 or 2 two digits, leading zero allowed
anchor_year, year, month, day = mw.ustring.match(date_string, patternspatterns_t['yMd'][1]);
month = get_month_number (month);
if 0 == month then return false; end -- return false if month text isn't one of the twelve months
-- end NOT supported at en.wiki ]]
 
elseif mw.ustring.match(date_string, patternspatterns_t['d-dMy'][1]) then -- day-range-initial: day–day month year; days are separated by endash
day, day2, month, anchor_year, year = mw.ustring.match(date_string, patternspatterns_t['d-dMy'][1]);
if tonumber(day) >= tonumber(day2) then return false; end -- date range order is left to right: earlier to later; dates may not be the same;
month = get_month_number (month);
வரி 533 ⟶ 524:
year2 = year;
 
elseif mw.ustring.match(date_string, patternspatterns_t['dM-dMy'][1]) then -- day initial month-day-range: day month - day month year; uses spaced endash
day, month, day2, month2, anchor_year, year = mw.ustring.match(date_string, patternspatterns_t['dM-dMy'][1]);
if (not is_valid_month_season_range(month, month2)) or not is_valid_year(year) then return false; end -- date range order is left to right: earlier to later;
month = get_month_number (month); -- for metadata
வரி 540 ⟶ 531:
year2 = year;
 
elseif mw.ustring.match(date_string, patternspatterns_t['Md-Mdy'][1]) then -- month initial month-day-range: month day – month day, year; uses spaced endash
month, day, month2, day2, anchor_year, year = mw.ustring.match(date_string, patternspatterns_t['Md-Mdy'][1]);
if (not is_valid_month_season_range(month, month2, param)) or not is_valid_year(year) then return false; end
month = get_month_number (month); -- for metadata
வரி 547 ⟶ 538:
year2 = year;
 
elseif mw.ustring.match(date_string, patternspatterns_t['dMy-dMy'][1]) then -- day initial month-day-year-range: day month year - day month year; uses spaced endash
day, month, year, day2, month2, anchor_year, year2 = mw.ustring.match(date_string, patternspatterns_t['dMy-dMy'][1]);
if tonumber(year2) <= tonumber(year) then return false; end -- must be sequential years, left to right, earlier to later
if not is_valid_year(year2) or not is_valid_month_range_style(month, month2) then return false; end -- year2 no more than one year in the future; months same style
வரி 555 ⟶ 546:
if 0 == month or 0 == month2 then return false; end -- both must be valid
 
elseif mw.ustring.match(date_string, patternspatterns_t['Mdy-Mdy'][1]) then -- month initial month-day-year-range: month day, year – month day, year; uses spaced endash
month, day, year, month2, day2, anchor_year, year2 = mw.ustring.match(date_string, patternspatterns_t['Mdy-Mdy'][1]);
if tonumber(year2) <= tonumber(year) then return false; end -- must be sequential years, left to right, earlier to later
if not is_valid_year(year2) or not is_valid_month_range_style(month, month2) then return false; end -- year2 no more than one year in the future; months same style
வரி 563 ⟶ 554:
if 0 == month or 0 == month2 then return false; end -- both must be valid
 
elseif mw.ustring.match(date_string, patternspatterns_t['Sy4-y2'][1]) then -- special case Winter/Summer year-year (YYYY-YY); year separated with unspaced endash
local century;
month, year, century, anchor_year, year2 = mw.ustring.match(date_string, patternspatterns_t['Sy4-y2'][1]);
if 'Winter' ~= month and 'Summer' ~= month then return false end; -- 'month' can only be Winter or Summer
anchor_year = year .. '–' .. anchor_year; -- assemble anchor_year from both years
வரி 573 ⟶ 564:
month = get_season_number(month, param);
 
elseif mw.ustring.match(date_string, patternspatterns_t['Sy-y'][1]) then -- special case Winter/Summer year-year; year separated with unspaced endash
month, year, anchor_year, year2 = mw.ustring.match(date_string, patternspatterns_t['Sy-y'][1]);
if 'Winter' ~= month and 'Summer' ~= get_season_number (month, then return false endparam); -- '<month'> can only be Winterwinter or Summersummer; also for metadata
if (month ~= cfg.date_names['en'].season['Winter']) and (month ~= cfg.date_names['en'].season['Summer']) then
anchor_year = year .. '–' .. anchor_year; -- assemble anchor_year from both years
return false; -- not Summer or Winter; abandon
end
anchor_year = year .. '–' .. anchor_year; -- assemble anchor_year from both years
if 1 ~= tonumber(year2) - tonumber(year) then return false; end -- must be sequential years, left to right, earlier to later
if not is_valid_year(year2) then return false; end -- no year farther in the future than next year
month = get_season_number (month, param); -- for metadata
 
elseif mw.ustring.match(date_string, patternspatterns_t['My-My'][1]) then -- month/season year - month/season year; separated by spaced endash
month, year, month2, anchor_year, year2 = mw.ustring.match(date_string, patternspatterns_t['My-My'][1]);
anchor_year = year .. '–' .. anchor_year; -- assemble anchor_year from both years
if tonumber(year) >= tonumber(year2) then return false; end -- left to right, earlier to later, not the same
வரி 596 ⟶ 589:
end
 
elseif mw.ustring.match(date_string, patternspatterns_t['M-My'][1]) then -- month/season range year; months separated by endash
month, month2, anchor_year, year = mw.ustring.match(date_string, patternspatterns_t['M-My'][1]);
if (not is_valid_month_season_range(month, month2, param)) or (not is_valid_year(year)) then return false; end
if 0 ~= get_month_number(month) then -- determined to be a valid range so just check this one to know if month or season
வரி 609 ⟶ 602:
year2 = year;
elseif mw.ustring.match(date_string, patternspatterns_t['My'][1]) then -- month/season/quarter/proper-name year
month, anchor_year, year = mw.ustring.match(date_string, patternspatterns_t['My'][1]);
if not is_valid_year(year) then return false; end
month = get_element_number(month, param); -- get month season quarter proper-name number or nil
if not month then return false; end -- not valid whatever it is
 
elseif mw.ustring.match(date_string, patternspatterns_t['y-y'][1]) then -- Year range: YYY-YYY or YYY-YYYY or YYYY–YYYY; separated by unspaced endash; 100-9999
year, anchor_year, year2 = mw.ustring.match(date_string, patternspatterns_t['y-y'][1]);
anchor_year = year .. '–' .. anchor_year; -- assemble anchor year from both years
if tonumber(year) >= tonumber(year2) then return false; end -- left to right, earlier to later, not the same
if not is_valid_year(year2) then return false; end -- no year farther in the future than next year
 
elseif mw.ustring.match(date_string, patternspatterns_t['y4-y2'][1]) then -- Year range: YYYY–YY; separated by unspaced endash
local century;
year, century, anchor_year, year2 = mw.ustring.match(date_string, patternspatterns_t['y4-y2'][1]);
anchor_year = year .. '–' .. anchor_year; -- assemble anchor year from both years
 
if in_array (param, {'date', 'publication-date', 'year'}) then
add_prop_cat ('year_range_abbreviated');
end
 
if 13 > tonumber(year2) then return false; end -- don't allow 2003-05 which might be May 2003
year2 = century .. year2; -- add the century to year2 for comparisons
if tonumber(year) >= tonumber(year2) then return false; end -- left to right, earlier to later, not the same
if not is_valid_year(year2) then return false; end -- no year farther in the future than next year
 
if in_array (param, {'date', 'publication-date', 'year'}) then -- here when 'valid' abbreviated year range; if one of these parameters
elseif mw.ustring.match(date_string, patterns['y'][1]) then -- year; here accept either YYY or YYYY
add_prop_cat ('year-range-abbreviated'); -- add properties cat
anchor_year, year = mw.ustring.match(date_string, patterns['y'][1]);
end
 
elseif mw.ustring.match(date_string, patterns_t['y'][1]) then -- year; here accept either YYY or YYYY
anchor_year, year = mw.ustring.match(date_string, patterns_t['y'][1]);
if false == is_valid_year(year) then
return false;
வரி 645 ⟶ 638:
end
 
if param ~= 'access-date' == param then -- testCITEREF accessdatedisambiguation hereonly becauseallowed wein have|date=; numerical|year= & |publication-date= partspromote to date
if anchor_year:match ('%l$') then
return false;
end
end
 
if 'access-date' == param then -- test access-date here because we have numerical date parts
if 0 ~= year and 0 ~= month and 0 ~= day and -- all parts of a single date required
0 == year2 and 0 == month2 and 0 == day2 then -- none of these; accessdateaccess-date must not be a range
if not is_valid_accessdate(year .. '-' .. month .. '-' .. day) then
return false; -- return false when accessdateaccess-date out of bounds
end
else
return false; -- return false when accessdateaccess-date is a range of two dates
end
end
 
if 'archive-date' == param then -- test archive-date here because we have numerical date parts
if not (0 ~= year and 0 ~= month and 0 ~= day and -- all parts of a single date required
0 == year2 and 0 == month2 and 0 == day2) then -- none of these; archive-date must not be a range
return false; -- return false when archive-date is a range of two dates
end
end
வரி 658 ⟶ 664:
local result=true; -- check whole dates for validity; assume true because not all dates will go through this test
if 0 ~= year and 0 ~= month and 0 ~= day and 0 == year2 and 0 == month2 and 0 == day2 then -- YMD (simple whole date)
result = is_valid_date (year, month, day, param); -- <param> for |pmc-embargo-date=
 
elseif 0 ~= year and 0 ~= month and 0 ~= day and 0 == year2 and 0 == month2 and 0 ~= day2 then -- YMD-d (day range)
result = is_valid_date (year, month, day);
result = result and is_valid_date (year, month, day2);
 
elseif 0 ~= year and 0 ~= month and 0 ~= day and 0 == year2 and 0 ~= month2 and 0 ~= day2 then -- YMD-md (day month range)
result = is_valid_date (year, month, day);
result = result and is_valid_date (year, month2, day2);
 
elseif 0 ~= year and 0 ~= month and 0 ~= day and 0 ~= year2 and 0 ~= month2 and 0 ~= day2 then -- YMD-ymd (day month year range)
வரி 723 ⟶ 729:
good_date, anchor_year, COinS_date = true, v.val:match("((%d+)%a?)");
end
elseif 'pmc-embargo-date' == k then -- if the parameter is |pmc-embargo-date=
good_date = check_date (v.val, k); -- go test the date
if true == good_date then -- if the date is a valid date
good_date, embargo_date = is_valid_embargo_date (v.val); -- is |pmc-embargo-date= date a single dmy, mdy, or ymd formatted date? yes: returns embargo date; no: returns 9999
end
else -- any other date-holding parameter
வரி 737 ⟶ 743:
end
return anchor_year, embargo_date; -- and done
end
 
 
--[[--------------------------< Y E A R _ C H E C K >----------------------------------------------------------
 
Temporary function to test |year= for acceptable values:
YYY, YYYY, year-only ranges, their circa forms, with or without CITEREF disambiguators.
 
When |year= holds some form of date that is not one of these year-only dates, emit a maintenance message.
 
This function necessary because many non-cs1|2 templates have a |year= parameter so cirrus searches are more-or-
less useless
 
]]
 
local function year_check (year)
year = year:gsub ('c%. *', ''); -- remove circa annotation (if present) before testing <year>
for _, index in ipairs ({'y-y', 'y4-y2', 'y'}) do -- spin through these indexes into patterns_t
if mw.ustring.match (year, patterns_t[index][1]) then
return; -- if a match then |year= holds a valid 'year'
end
end
 
set_message ('maint_year'); -- if here, |year= value is not an accepted value; add a maint cat
end
 
வரி 747 ⟶ 778:
2 - year value matches the year value in date when date is in the form YYYY-MM-DD and year is disambiguated (|year=YYYYx)
 
the numernicnumeric value in <result> determines the 'output' if any from this function:
0 – adds error message to error_list sequence table
1 – adds maint cat
வரி 810 ⟶ 841:
format string used by string.format()
identifier letters ('d', 'm', 'y', 'd2', 'm2', 'y2') that serve as indexes into a table t{} that holds captures
from mw.ustring.match() for the various date parts specified by patternspatterns_t[pattern_idx][1]
 
Items in patternspatterns_t{} have the general form:
['ymd'] = {'^(%d%d%d%d)%-(%d%d)%-(%d%d)$', 'y', 'm', 'd'}, where:
['ymd'] is pattern_idx
patternspatterns_t['ymd'][1] is the match pattern with captures for mw.ustring.match()
patternspatterns_t['ymd'][2] is an indicator letter identifying the content of the first capture
patternspatterns_t['ymd'][3] ... the second capture etc.
 
when a pattern matches a date, the captures are loaded into table t{} in capture order using the idemtifier
வரி 826 ⟶ 857:
format_param set to the desired format. This function loads table t{} as described and then calls string.format()
with the format string specified by re_format[pattern_idx][format_param][1] using values taken from t{} according
to the capture identifier letters specified by patternspatterns_t[pattern_idx][format_param][n] where n is 2..
 
]]
வரி 891 ⟶ 922:
local function reformatter (date, pattern_idx, format_param, mon_len)
if not in_array (pattern_idx, {'ymd', 'Mdy', 'Md-dy', 'dMy', 'yMd', 'd-dMy', 'dM-dMy', 'Md-Mdy', 'dMy-dMy', 'Mdy-Mdy', 'My-My', 'M-My', 'My'}) then
return; -- not in this set of date format patternspatterns_t then not a reformattable date
end
வரி 902 ⟶ 933:
end
 
-- yMd is not supported at en.wiki; ifwhen yMd is supported at your wiki, uncomment the next line
-- if 'yMd' == format_param and in_array (pattern_idx, {'yMd', 'Md-dy', 'd-dMy', 'dM-dMy', 'Md-Mdy', 'dMy-dMy', 'Mdy-Mdy'}) then -- these formats not convertable; yMd not supported at en.wiki
if 'yMd' == format_param then -- ifyMd not supported at en.wiki; when yMd is supported at your wiki, remove or comment-out the nextthis line
if 'yMd' == format_param then -- yMd not supported at en.wiki
return; -- not a reformattable date
end
local c1, c2, c3, c4, c5, c6, c7; -- these hold the captures specified in patternspatterns_t[pattern_idx][1]
c1, c2, c3, c4, c5, c6, c7 = mw.ustring.match (date, patternspatterns_t[pattern_idx][1]); -- get the captures
 
local t = { -- table that holds k/v pairs of date parts from the captures and patternspatterns_t[pattern_idx][2..]
[patternspatterns_t[pattern_idx][2]] = c1; -- at minimum there is always one capture with a matching indicator letter
[patternspatterns_t[pattern_idx][3] or 'x'] = c2; -- patternspatterns_t can have a variable number of captures; each capture requires an indicator letter;
[patternspatterns_t[pattern_idx][4] or 'x'] = c3; -- where there is no capture, there is no indicator letter so n in patternspatterns_t[pattern_idx][n] will be nil;
[patternspatterns_t[pattern_idx][5] or 'x'] = c4; -- the 'x' here spoofs an indicator letter to prevent 'table index is nil' error
[patternspatterns_t[pattern_idx][6] or 'x'] = c5;
[patternspatterns_t[pattern_idx][7] or 'x'] = c6;
[patternspatterns_t[pattern_idx][8] or 'x'] = c7;
};
 
if t.a then -- if this date has an anchor year capture (all convertable date formats except ymd)
t.y =if t.a; y2 then -- use the anchorfor year capture when reassembling therange date formats
t.y2 = t.a; -- use the anchor year capture when reassembling the date
else -- here for single date formats (except ymd)
t.y = t.a; -- use the anchor year capture when reassembling the date
end
end
 
if tonumber(t.m) then -- if raw month is a number (converting from ymd)
if 's' == mon_len then -- if we are to use abbreviated month names
t.m = cfg.date_names['inv_local_sinv_local_short'][tonumber(t.m)]; -- convert it to a month name
else
t.m = cfg.date_names['inv_local_linv_local_long'][tonumber(t.m)]; -- convert it to a month name
end
t.d = t.d:gsub ('0(%d)', '%1'); -- strip leading '0' from day if present
elseif 'ymd' == format_param then -- when converting to ymd
t.y = t.y:gsub ('%a', ''); -- strip CITREF disambiguator if present; anchor year already known so process can proceed; TODO: maint message?
if 1582 > tonumber(t.y) then -- ymd format dates not allowed before 1582
if 1582 > tonumber (t.y) then -- ymd format dates not allowed before 1582
return;
end
வரி 944 ⟶ 979:
t[mon] = get_month_number (t[mon]); -- get the month number for this month (is length agnostic)
if 0 == t[mon] then return; end -- seasons and named dates can't be converted
t[mon] = (('s' == mon_len) and cfg.date_names['inv_local_sinv_local_short'][t[mon]]) or cfg.date_names['inv_local_linv_local_long'][t[mon]]; -- fetch month name according to length
end
end
வரி 1,014 ⟶ 1,049:
if is_set (param_val.val) then -- if the parameter has a value
if not (not all and in_array (param_name, {'access-date', 'archive-date'})) then -- skip access- or archive-date unless format is xxx-all; yeah, ugly; TODO: find a better way
for pattern_idx, pattern in pairs (patternspatterns_t) do
if mw.ustring.match (param_val.val, pattern[1]) then
if all and in_array (param_name, {'access-date', 'archive-date'}) then -- if this date is an access- or archive-date
வரி 1,025 ⟶ 1,060:
date_parameters_list[param_name].val = new_date; -- update date in date list
result = true; -- and announce that changes have been made
break;
end
end -- if
வரி 1,031 ⟶ 1,067:
end -- if
end -- for
return result; -- declare boolean result and done
end
 
வரி 1,049 ⟶ 1,085:
for param_name, param_val in pairs(date_parameters_list) do -- for each date-holding parameter in the list
if is_set (param_val.val) and
not mw.ustring.match (param_val.val, patternspatterns_t.ymd[1]) then -- for those that are not ymd dates (ustring because here digits may not be Western)
param_val.val, n = param_val.val:gsub ('%-', '–'); -- replace any hyphen with ndash
if 0 ~= n then
வரி 1,058 ⟶ 1,094:
end
return result; -- so we know if any hyphens were replaced
end
 
 
--[[--------------------------< E D T F _ T R A N S F O R M >--------------------------------------------------
 
Loops through the list of date-holding parameters and converts any EDTF formatted dates to MOS compliant dates.
Only YYY-MM-XX supported at this time. Not called if the cs1|2 template has any date errors.
 
must be done before reformat_dates() and before date_hyphen_to_dash()
 
Modifies the date_parameters_list and returns true if transformation is performed, else returns false.
 
]]
 
local function edtf_transform (date_parameters_list)
local result = false;
local source_date = {};
 
for param_name, param_val in pairs(date_parameters_list) do -- for each date-holding parameter in the list
if is_set(param_val.val) and param_val.val:match (patterns.ymx[1]) then -- if parameter is set and is an EDTF dates
source_date.year, source_date.month = param_val.val:match (patterns.ymx[1]); -- get year and month number
source_date.day = 1; -- required by os.time()
date_parameters_list[param_name].val = mw.text.trim (os.date ('%B %Y', os.time (source_date)));
result = true;
end
end
return result; -- so we know if a transform was done
end
 
வரி 1,090 ⟶ 1,099:
--[[-------------------------< D A T E _ N A M E _ X L A T E >------------------------------------------------
 
Attempts to translate English monthdate names to local-language monthdate names using names supplied by MediaWiki's
date parser function. This is simple name-for-name replacement and may not work for all languages.
 
வரி 1,104 ⟶ 1,113:
local date;
local sources_t = {
{cfg.date_names.en.long, cfg.date_names.inv_local_long}, -- for translating long English month names to long local month names
{cfg.date_names.en.short, cfg.date_names.inv_local_short}, -- short month names
{cfg.date_names.en.quarter, cfg.date_names.inv_local_quarter}, -- quarter date names
{cfg.date_names.en.season, cfg.date_names.inv_local_season}, -- season date nam
{cfg.date_names.en.named, cfg.date_names.inv_local_named}, -- named dates
}
 
local function is_xlateable (month) -- local function to get local date name that replaces existing English-language date name
for _, date_names_t in ipairs (sources_t) do -- for each sequence table in date_names_t
if date_names_t[1][month] then -- if date name is English month (long or short), quarter, season or named and
if date_names_t[2][date_names_t[1][month]] then -- if there is a matching local date name
return date_names_t[2][date_names_t[1][month]]; -- return the local date name
end
end
end
end
 
for param_name, param_val in pairs(date_parameters_list) do -- for each date-holding parameter in the list
if is_set(param_val.val) then -- if the parameter has a value
date = param_val.val;
for month in mw.ustring.gmatch (date, '[%a ]+') do -- iterate through all datesdate names in the date (single date or date range)
month = mw.text.trim (month); -- this because quarterly dates contain whitespace
if cfg.date_names.en.long[month] then
modexlate = 'F'is_xlateable (month); -- Englishget nametranslate is long so<month>; usereturns longtranslation localor namenil
elseif cfg.date_names.en.short[month] then
if xlate then
mode = 'M'; -- English name is short so use short local name
else
mode = nil; -- not an English month name; could be local language month name or an English season name
end
if mode then -- might be a season
xlate = lang_object:formatDate(mode, '1' .. month); -- translate the month name to this local language
date = mw.ustring.gsub (date, month, xlate); -- replace the English with the translation
date_parameters_list[param_name].val = date; -- save the translated date
வரி 1,151 ⟶ 1,172:
 
cfg = cfg_table_ptr; -- import tables from selected Module:Citation/CS1/Configuration
end
 
 
--[[--------------------------< A R C H I V E _ D A T E _ C H E C K >------------------------------------------
 
Compare value in |archive-date= with the timestamp in Wayback machine urls. Emits an error message with suggested
date from the |archive-url= timestamp in an appropriate format when the value in |archive-date= does not match
the timestamp.
 
this function never called when any date in a cs1|2 template has errors
 
error message suggests new |archive-date= value in an appropriate format specified by <df>. <df> is either
|df= or cfg.global_df in that order. If <df> is nil, suggested date has format from |archive-date=. There is
a caveat: when |df=dmy or |df=mdy, the reformatter leaves |access-date= and |archive-date= formats as they are.
The error message suggested date is passed to the formatter as YYYY-MM-DD so when |df=dmy or |df=mdy, the format
is not changed.
 
]]
 
local function archive_date_check (archive_date, archive_url_timestamp, df)
local archive_date_format = 'dmy-y'; -- holds the date format of date in |archive-date; default to ymd; 'dmy' used here to spoof reformat_dates()
for _, v_t in ipairs ({{'dMy', 'dmy-all'}, {'Mdy', 'mdy-all'}}) do -- is |archive-date= format dmy or mdy?
if archive_date:match (patterns_t[v_t[1]][1]) then -- does the pattern match?
archive_date_format = cfg.keywords_xlate[v_t[2]]; -- get appropriate |df= supported keyword from the i18n translator table
break;
end
end
local dates_t = {};
dates_t['archive-date'] = {val=archive_date, name=''}; -- setup to call reformat_dates(); never called when errors so <name> unset as not needed
reformat_dates (dates_t, 'dmy-y'); -- reformat |archive-date= to ymd; 'dmy' used here to spoof reformat_dates()
local archive_url_date = archive_url_timestamp:gsub ('(%d%d%d%d)(%d%d)(%d%d)%d*', '%1-%2-%3'); -- make ymd format date from timestamp
 
if dates_t['archive-date'].val == archive_url_date then -- are the two dates the same
return; -- yes, done
else
dates_t['archive-date'] = {val=archive_url_date, name=''}; -- setup to call reformat_dates() with the timestamp date
reformat_dates (dates_t, df or archive_date_format); -- reformat timestamp to format specified by <df> or format used in |archive-date=
archive_url_date = dates_t['archive-date'].val;
set_message ('err_archive_date_url_ts_mismatch', archive_url_date); -- emit an error message
end
end
 
வரி 1,158 ⟶ 1,221:
 
return { -- return exported functions
archive_date_check = archive_date_check,
dates = dates,
year_date_check = year_date_check,
reformat_dates = reformat_dates,
date_hyphen_to_dash = date_hyphen_to_dash,
date_name_xlate = date_name_xlate,
dates = dates,
edtf_transform = edtf_transform,
reformat_dates = reformat_dates,
set_selected_modules = set_selected_modules
set_selected_modules = set_selected_modules,
year_check = year_check,
year_date_check = year_date_check,
}
"https://tamilar.wiki/w/Module:Citation/CS1/Date_validation" இலிருந்து மீள்விக்கப்பட்டது