தமிழர்விக்கி

Module:Citation/CS1/Date validation: திருத்தங்களுக்கு இடையிலான வேறுபாடு

← முந்திய தொகுப்புஅடுத்த தொகுப்பு →
உள்ளடக்கம் நீக்கப்பட்டது உள்ளடக்கம் சேர்க்கப்பட்டது
சி en:Module:Citation/CS1/Date_validation இலிருந்து ஒரு திருத்தம்: Sources of articles
பின்வரும் பதிப்புக்கு மீளமைக்கப்பட்டது: 1981206 AntanO (talk) உடையது: Update. (மின்)
வரிசை 97:
return true;
end
 
 
--[[--------------------------< I S _ V A L I D _ Y E A R >----------------------------------------------------
வரி 111 ⟶ 112:
end
 
--[[
--[[--------------------------< I S _ V A L I D _ D A T E >----------------------------------------------------
Returns true if day is less than or equal to the number of days in month and year is no farther into the future than next year; else returns false.
than next year; else returns false.
 
Assumes Julian calendar prior to year 1582 and Gregorian calendar thereafter. Accounts for Julian calendar leap▼
years before 1582 and Gregorian leap years after 1582. Where the two calendars overlap (1582 to approximately
1923) dates are assumed to be Gregorian.▼
 
▲Assumes Julian calendar prior to year 1582 and Gregorian calendar thereafter. Accounts for Julian calendar leap years before 1582 and Gregorian leap years after 1582.
▲Where the two calendars overlap (1582 to approximately 1923) dates are assumed to be Gregorian.
]]
 
local function is_valid_date (year, month, day)
local days_in_month = {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
local month_length;
if not is_valid_year(year) then -- no farther into the future than next year
return false;
end
monthif (2== tonumber(month); then -- required for YYYY-MM-DDif datesFebruary
month_length = 28; -- then 28 days unless▼
if 1582 > tonumber(2==monthyear) then -- ifJulian Februarycalendar
▲ month_length = 28; -- then 28 days unless
if 1582 > tonumber(year) then -- Julian calendar
if 0==(year%4) then
month_length = 29;
end
else -- Gregorian calendar
if (0==(year%4) and (0~=(year%100) or 0==(year%400))) then -- is a leap year?
month_length = 29; -- if leap year then 29 days in February
end
end
else
month_length=days_in_month[tonumber(month)];
end
 
வரி 218 ⟶ 213:
This function receives a table of date parts for one or two dates and an empty table reference declared in
Module:Citation/CS1. The function is called only for |date= parameters and only if the |date=<value> is
determined to be a valid date format. The question of what to do with invalidinvlaid date formats is not answered here.
 
The date parts in the input table are converted to an ISO 8601 conforming date string:
வரி 301 ⟶ 296:
--[[--------------------------< C H E C K _ D A T E >----------------------------------------------------------
 
Check date format to see that it is one of the formats approved by WP:DATESNO or WP:DATERANGE. Exception: only allowed range separator is endash.
allowed range separator is endash. Additionally, check the date to see that it is a real date: no 31 in 30-day months; no 29 February when not a leap year. Months, both long-form and three
character abbreviations, and seasons must be spelled correctly. Future years beyond next year are not allowed.▼
months; no 29 February when not a leap year. Months, both long-form and three character abbreviations, and seasons
▲must be spelled correctly. Future years beyond next year are not allowed.
 
If the date fails the format tests, this function returns false and does not return values for anchor_year and COinS_date. When this happens, the date parameter is
used in the COinS metadata and the CITEREF identifier gets its year from the year parameter if present otherwise CITEREF does not get a date value.▼
COinS_date. When this happens, the date parameter is used in the COinS metadata and the CITEREF identifier gets
▲its year from the year parameter if present otherwise CITEREF does not get a date value.
 
Inputs:
வரி 317 ⟶ 310:
true, anchor_year, COinS_date
anchor_year can be used in CITEREF anchors
COinS_date is date_string without anchor_year disambiguator if any -- this is being obsoleted. In future:
COinS_date is ISO 8601 format date; see make_COInS_date()
 
]]
 
local function check_date (date_string, tCOinS_date)
local year; -- assume that year2, months, and days are not used;
வரி 423 ⟶ 415:
end
 
elseif date_string:match ("^%a+–%a+ +[1-9]%d%d%d%a?$") then -- month/season range year; months separated by endash
month, month2, anchor_year, year=date_string:match ("(%a+)–(%a+)%s*((%d%d%d%d)%a?)");
if (not is_valid_month_season_range(month, month2)) or (not is_valid_year(year)) then return false; end
வரி 469 ⟶ 461:
 
else
return false; -- date format not one of the MOS:DATE approved formats
end
 
local result=true; -- check whole dates for validity; assume true because not all dates will go through this test
if 0 ~= year and 0 ~= month and 0 ~= day and 0 == year2 and 0 == month2 and 0 == day2 then -- YMD (simple whole date)
result=is_valid_date(year,month,day);
வரி 490 ⟶ 482:
if false == result then return false; end
-- if here, then date_string is valid; get coins_date from date_string (leave CITEREF disambiguator) ...
-- coins_date=date_string:match("^(.+%d)%a?$"); -- last character of valid disambiguatable date is always a digit
-- coins_date= mw.ustring.gsub(coins_date, "–", "-" ); -- ... and replace any ndash with a hyphen
 
if nil ~= tCOinS_date then -- this table only passed into this function when testing |date= parameter values
வரி 495 ⟶ 490:
end
return true, anchor_year; -- format is good and date string represents a real date
-- return true, anchor_year, coins_date; -- format is good and date string represents a real date
end
 
 
--[[--------------------------< D A T E S >--------------------------------------------------------------------
வரி 514 ⟶ 509:
local COinS_date; -- will return as nil if the date being tested is not |date=
local error_message = "";
-- local mismatch = 0;
local good_date = false;
for k, v in pairs(date_parameters_list) do -- for each date-holding parameter in the list
if is_set(v) then -- if the parameter has a value
if v:match("^c%. [1-9]%d%d%d?%a?$") then -- special case for c. year or with or without CITEREF disambiguator - only |date= and |year=
local year = v:match("c%. ([1-9]%d%d%d?)%a?"); -- get the year portion so it can be tested
if 'date'==k then
anchor_year, COinS_date = v:match("((c%. [1-9]%d%d%d?)%a?)"); -- anchor year and COinS_date only from |date= parameter
வரி 526 ⟶ 522:
good_date = is_valid_year(year);
end
elseif 'date'==k then -- if the parameter is |date=
if v:match("^n%.d%.%a?") then -- if |date=n.d. with or without a CITEREF disambiguator
good_date, anchor_year, COinS_date = true, v:match("((n%.d%.)%a?)"); --"n.d."; no error when date parameter is set to no date
elseif v:match("^nd%a?$") then -- if |date=nd with or without a CITEREF disambiguator
good_date, anchor_year, COinS_date = true, v:match("((nd)%a?)"); --"nd"; no error when date parameter is set to no date
else
good_date, anchor_year, COinS_date = check_date (v, tCOinS_date); -- go test the date
end
elseif 'access-date'==k then -- if the parameter is |date=
good_date = check_date (v); -- go test the date
if true == good_date then -- if the date is a valid date
good_date = is_valid_accessdate (v); -- is Wikipedia start date < accessdate < tomorrow's date?
end
else -- any other date-holding parameter
good_date = check_date (v); -- go test the date
end
if false==good_date then -- assemble one error message so we don't add the tracking category multiple times
if is_set(error_message) then -- once we've added the first portion of the error message ...
error_message=error_message .. ", "; -- ... add a comma space separator
end
error_message=error_message .. "&#124;" .. k .. "="; -- add the failed parameter
end
end
end
-- return anchor_year, COinS_date, error_message, mismatch; -- and done
return anchor_year, error_message; -- and done
end
 
 
--[[--------------------------< Y E A R _ D A T E _ C H E C K >------------------------------------------------
"https://tamilar.wiki/w/Module:Citation/CS1/Date_validation" இலிருந்து மீள்விக்கப்பட்டது